will find a load that you and your gun likes. Alcorn is a Swift A Frame fan, while my favorite bullets are the Sierra bullets. Being weaned on the Super Vel 44 Magnum 180 grain bullet I found long ago that in most cases I can do just as well with the light to medium weight bullets as I could with a heavy bullet and have less recoil and less back thrust on my elbow and my gun. For that reason I never use the real heavy bullets. In 44 Mag I seldom go over 260 grain bullets. In a 41 GNR I always use one of the 210 or 220 grain Silhouette bullets and in most cases one shot will do the trick if I do my part.
The only time I use a heavy bullet is in my Encore for dangerous game. My Cape Buffalo was taken with one shot in the 450 GNR and a 500 grain soft point .458 caliber bullet.
Again my personal preference only. Try different loads and you will find a load that you and your 44 like.
-
I ask a lot
- Tom, 2020-03-26, 13:15
-
we have built dozens and dozens of 475 and 500 Linebaugh,
- Gary Reeder, 2020-03-26, 15:09
-
So, in layman's terms
- Tom, 2020-03-26, 15:23
- yup (nm) - Gary Reeder, 2020-03-26, 16:36
-
So, in layman's terms
- Tom, 2020-03-26, 15:23
-
It’s not so much the bullet weight
- MTM, 2020-03-26, 13:39
-
I came into a pile of SSK 330 gr. TC cast
- WB, 2020-03-26, 14:16
- YOU DON'T WANNA KNOW HOW - JT, 2020-03-27, 05:44
-
Mould was called 320gr. (nm)
- Alcorn, 2020-03-26, 14:24
-
I’m a monkey’s uncle, looky here
- WB, 2020-03-26, 18:06
-
We knew that (nm)
- IC, 2020-03-26, 19:13
-
Do you have any .44's Irv? I can't remember. (nm)
- WB, 2020-03-26, 20:21
- Yes (nm) - IC, 2020-03-27, 06:29
-
I remember shooting your short barrel 429 Gnr
- Derek, 2020-03-27, 03:25
-
Puffy helped Roman get that at HHC one year.
- WB, 2020-03-27, 09:22
-
WB was that an Encore or g2? (nm)
- Derek, 2020-03-27, 12:37
- Encore, I’ll post a pic of it later. (nm) - WB, 2020-03-27, 14:23
-
WB was that an Encore or g2? (nm)
- Derek, 2020-03-27, 12:37
-
Puffy helped Roman get that at HHC one year.
- WB, 2020-03-27, 09:22
-
Do you have any .44's Irv? I can't remember. (nm)
- WB, 2020-03-26, 20:21
-
We knew that (nm)
- IC, 2020-03-26, 19:13
-
I’m a monkey’s uncle, looky here
- WB, 2020-03-26, 18:06
- The HMS is listed as - Tom, 2020-03-26, 14:02
-
I came into a pile of SSK 330 gr. TC cast
- WB, 2020-03-26, 14:16
-
I have a .510 GNR built on the Super Blackhawk
- Larry Fry, 2020-03-26, 13:25
-
Thanks Larry, the loads I am
- Tom, 2020-03-26, 13:39
-
I HAVE SHOT MANY, MANY 300 GRAIN BULLET
- JT, 2020-03-26, 13:47
-
44 mag factory loads
- Alcorn, 2020-03-26, 14:05
-
try several loads shown in the loading manuals and you
- Gary Reeder, 2020-03-26, 15:19
- Back in the early to mid 1980's - John W, 2020-03-26, 15:37
-
try several loads shown in the loading manuals and you
- Gary Reeder, 2020-03-26, 15:19
-
44 mag factory loads
- Alcorn, 2020-03-26, 14:05
-
I HAVE SHOT MANY, MANY 300 GRAIN BULLET
- JT, 2020-03-26, 13:47
-
Thanks Larry, the loads I am
- Tom, 2020-03-26, 13:39
-
we have built dozens and dozens of 475 and 500 Linebaugh,
- Gary Reeder, 2020-03-26, 15:09