frame and I shoot 350 grain hard cast LBT bullets in it. Montana Bullet Works has them. Stick with the loads in Gary's Red Reloading manual and you can't go wrong... Or at least you shouldn't, anything is possible I suppose. OR
are you asking about a .44 magnum load? IF so, the 305 grain LBT hard cast will do ok if you don't try full house loads and back off of the 240 loads as a start.
-
I ask a lot
- Tom, 2020-03-26, 13:15
-
we have built dozens and dozens of 475 and 500 Linebaugh,
- Gary Reeder, 2020-03-26, 15:09
-
So, in layman's terms
- Tom, 2020-03-26, 15:23
- yup (nm) - Gary Reeder, 2020-03-26, 16:36
-
So, in layman's terms
- Tom, 2020-03-26, 15:23
-
It’s not so much the bullet weight
- MTM, 2020-03-26, 13:39
-
I came into a pile of SSK 330 gr. TC cast
- WB, 2020-03-26, 14:16
- YOU DON'T WANNA KNOW HOW - JT, 2020-03-27, 05:44
-
Mould was called 320gr. (nm)
- Alcorn, 2020-03-26, 14:24
-
I’m a monkey’s uncle, looky here
- WB, 2020-03-26, 18:06
-
We knew that (nm)
- IC, 2020-03-26, 19:13
-
Do you have any .44's Irv? I can't remember. (nm)
- WB, 2020-03-26, 20:21
- Yes (nm) - IC, 2020-03-27, 06:29
-
I remember shooting your short barrel 429 Gnr
- Derek, 2020-03-27, 03:25
-
Puffy helped Roman get that at HHC one year.
- WB, 2020-03-27, 09:22
-
WB was that an Encore or g2? (nm)
- Derek, 2020-03-27, 12:37
- Encore, I’ll post a pic of it later. (nm) - WB, 2020-03-27, 14:23
-
WB was that an Encore or g2? (nm)
- Derek, 2020-03-27, 12:37
-
Puffy helped Roman get that at HHC one year.
- WB, 2020-03-27, 09:22
-
Do you have any .44's Irv? I can't remember. (nm)
- WB, 2020-03-26, 20:21
-
We knew that (nm)
- IC, 2020-03-26, 19:13
-
I’m a monkey’s uncle, looky here
- WB, 2020-03-26, 18:06
- The HMS is listed as - Tom, 2020-03-26, 14:02
-
I came into a pile of SSK 330 gr. TC cast
- WB, 2020-03-26, 14:16
-
I have a .510 GNR built on the Super Blackhawk
- Larry Fry, 2020-03-26, 13:25
-
Thanks Larry, the loads I am
- Tom, 2020-03-26, 13:39
-
I HAVE SHOT MANY, MANY 300 GRAIN BULLET
- JT, 2020-03-26, 13:47
-
44 mag factory loads
- Alcorn, 2020-03-26, 14:05
-
try several loads shown in the loading manuals and you
- Gary Reeder, 2020-03-26, 15:19
- Back in the early to mid 1980's - John W, 2020-03-26, 15:37
-
try several loads shown in the loading manuals and you
- Gary Reeder, 2020-03-26, 15:19
-
44 mag factory loads
- Alcorn, 2020-03-26, 14:05
-
I HAVE SHOT MANY, MANY 300 GRAIN BULLET
- JT, 2020-03-26, 13:47
-
Thanks Larry, the loads I am
- Tom, 2020-03-26, 13:39
-
we have built dozens and dozens of 475 and 500 Linebaugh,
- Gary Reeder, 2020-03-26, 15:09