Probably due to your same situation. In the .44 it’s ok up to around 1300 fps. Then I get my fill of it pretty fast! I have been shooting them in my SBH at 1000-1200 fps. Only problem is the added recoil for residence time in barrel makes it shoot high. Only solution is to change the front (rear is at its mechanical limits) or push the bullet faster, and that just hurts!
-
I ask a lot
- Tom, 2020-03-26, 13:15
-
we have built dozens and dozens of 475 and 500 Linebaugh,
- Gary Reeder, 2020-03-26, 15:09
-
So, in layman's terms
- Tom, 2020-03-26, 15:23
- yup (nm) - Gary Reeder, 2020-03-26, 16:36
-
So, in layman's terms
- Tom, 2020-03-26, 15:23
-
It’s not so much the bullet weight
- MTM, 2020-03-26, 13:39
-
I came into a pile of SSK 330 gr. TC cast
- WB, 2020-03-26, 14:16
- YOU DON'T WANNA KNOW HOW - JT, 2020-03-27, 05:44
-
Mould was called 320gr. (nm)
- Alcorn, 2020-03-26, 14:24
-
I’m a monkey’s uncle, looky here
- WB, 2020-03-26, 18:06
-
We knew that (nm)
- IC, 2020-03-26, 19:13
-
Do you have any .44's Irv? I can't remember. (nm)
- WB, 2020-03-26, 20:21
- Yes (nm) - IC, 2020-03-27, 06:29
-
I remember shooting your short barrel 429 Gnr
- Derek, 2020-03-27, 03:25
-
Puffy helped Roman get that at HHC one year.
- WB, 2020-03-27, 09:22
-
WB was that an Encore or g2? (nm)
- Derek, 2020-03-27, 12:37
- Encore, I’ll post a pic of it later. (nm) - WB, 2020-03-27, 14:23
-
WB was that an Encore or g2? (nm)
- Derek, 2020-03-27, 12:37
-
Puffy helped Roman get that at HHC one year.
- WB, 2020-03-27, 09:22
-
Do you have any .44's Irv? I can't remember. (nm)
- WB, 2020-03-26, 20:21
-
We knew that (nm)
- IC, 2020-03-26, 19:13
-
I’m a monkey’s uncle, looky here
- WB, 2020-03-26, 18:06
- The HMS is listed as - Tom, 2020-03-26, 14:02
-
I came into a pile of SSK 330 gr. TC cast
- WB, 2020-03-26, 14:16
-
I have a .510 GNR built on the Super Blackhawk
- Larry Fry, 2020-03-26, 13:25
-
Thanks Larry, the loads I am
- Tom, 2020-03-26, 13:39
-
I HAVE SHOT MANY, MANY 300 GRAIN BULLET
- JT, 2020-03-26, 13:47
-
44 mag factory loads
- Alcorn, 2020-03-26, 14:05
-
try several loads shown in the loading manuals and you
- Gary Reeder, 2020-03-26, 15:19
- Back in the early to mid 1980's - John W, 2020-03-26, 15:37
-
try several loads shown in the loading manuals and you
- Gary Reeder, 2020-03-26, 15:19
-
44 mag factory loads
- Alcorn, 2020-03-26, 14:05
-
I HAVE SHOT MANY, MANY 300 GRAIN BULLET
- JT, 2020-03-26, 13:47
-
Thanks Larry, the loads I am
- Tom, 2020-03-26, 13:39
-
we have built dozens and dozens of 475 and 500 Linebaugh,
- Gary Reeder, 2020-03-26, 15:09