Reeder Custom Guns - The “trick” is to shim the bolt

steve todd
The “trick” is to shim the bolt
Monday, January 11, 2021, 10:14

Washers or a spacer to raise the action a little bit, then glass bed. Modeling clay for dams, lots of release agent (car wax if nothing else).

I really don't like this design but we'll see - WB, 2021-01-11, 10:07
- The “trick” is to shim the bolt - steve todd, 2021-01-11, 10:14
  - In conjunction with the bedding I can see that. - WB, 2021-01-11, 10:40
    - Then you bed the rear - steve todd, 2021-01-11, 10:59
      - This is two runs. Feels solid, barrel floating. - WB, 2021-01-11, 13:17
        Be forwarned. If you ever try to glass bed a tube feed gun - WB, 2021-01-11, 15:25

powered by my little forum