You have to be careful not to over do on the barrel channel. If that glass gets under the barrel the "tube" is trapped. It can't come through the now smaller channel.
Kind of the "measure twice, cut once" line of thinking.
-
I really don't like this design but we'll see
- WB, 2021-01-11, 10:07
-
The “trick” is to shim the bolt
- steve todd, 2021-01-11, 10:14
-
In conjunction with the bedding I can see that.
- WB, 2021-01-11, 10:40
-
Then you bed the rear
- steve todd, 2021-01-11, 10:59
-
This is two runs. Feels solid, barrel floating.
- WB, 2021-01-11, 13:17
- Be forwarned. If you ever try to glass bed a tube feed gun - WB, 2021-01-11, 15:25
-
This is two runs. Feels solid, barrel floating.
- WB, 2021-01-11, 13:17
-
Then you bed the rear
- steve todd, 2021-01-11, 10:59
-
In conjunction with the bedding I can see that.
- WB, 2021-01-11, 10:40
-
The “trick” is to shim the bolt
- steve todd, 2021-01-11, 10:14