Reeder Custom Guns - some folks don't but I recommend annealing

Gary Reeder
some folks don't but I recommend annealing
Thursday, January 09, 2020, 11:38

the cases before sizing the up to 243. And I haven't lost any that I can think of. I start with 22 caliber, sizing it up in the 223, then from there to 243. Some say it works for them going from 20 caliber right up to 243. If you anneal the necks and use a good lube inside the necks you shouldn't have any problems at all.

Case lube - Josh, 2020-01-08, 22:17
- I use the Lee Resizing Lube - steve todd, 2020-01-09, 11:08
- Hornady is great and it can have other uses (nm) - Lynn, 2020-01-09, 08:37
- Imperial sizing die wax (nm) - Dave H., 2020-01-09, 05:29
- on straight cases I use Hornady One Shot. Put - gary reeder, 2020-01-08, 22:27
  - I will go with Gary on this, I find the One Shot - Amede, 2020-01-09, 07:12
  - I USE ONE SHOT EVEN ON - JT, 2020-01-09, 02:34
    - John is right on that. Even with carbide dies - Gary Reeder, 2020-01-09, 10:22
      - I do that with the 357 max and 445 SM cases (nm) - Amede, 2020-01-09, 11:53
  - What about resizing? I.E. .204 to .243? (nm) - Josh, 2020-01-08, 22:33
    - some folks don't but I recommend annealing - Gary Reeder, 2020-01-09, 11:38
      - That reminds me - Josh, 2020-01-09, 16:11
        must have been no folks from San Francisco on that site (nm) - Gary Reeder, 2020-01-09, 16:15
    - Anything different in the neck? (nm) - Josh, 2020-01-09, 04:45
    - Hornady Unique Lube, never lets me down (nm) - Sunny, 2020-01-08, 23:08
- Meant “sizing wax” (nm) - Josh, 2020-01-08, 22:19