Reeder Custom Guns - I will go with Gary on this, I find the One Shot

Amede
I will go with Gary on this, I find the One Shot
Thursday, January 09, 2020, 07:12

works well on straight wall, but the RCBS lube is what is needed when forming cases. I have stuck a couple of 355 GNR cases using one shot, not with the RCBS lube.

Case lube - Josh, 2020-01-08, 22:17
- I use the Lee Resizing Lube - steve todd, 2020-01-09, 11:08
- Hornady is great and it can have other uses (nm) - Lynn, 2020-01-09, 08:37
- Imperial sizing die wax (nm) - Dave H., 2020-01-09, 05:29
- on straight cases I use Hornady One Shot. Put - gary reeder, 2020-01-08, 22:27
  - I will go with Gary on this, I find the One Shot - Amede, 2020-01-09, 07:12
  - I USE ONE SHOT EVEN ON - JT, 2020-01-09, 02:34
    - John is right on that. Even with carbide dies - Gary Reeder, 2020-01-09, 10:22
      - I do that with the 357 max and 445 SM cases (nm) - Amede, 2020-01-09, 11:53
  - What about resizing? I.E. .204 to .243? (nm) - Josh, 2020-01-08, 22:33
    - some folks don't but I recommend annealing - Gary Reeder, 2020-01-09, 11:38
      - That reminds me - Josh, 2020-01-09, 16:11
        must have been no folks from San Francisco on that site (nm) - Gary Reeder, 2020-01-09, 16:15
    - Anything different in the neck? (nm) - Josh, 2020-01-09, 04:45
    - Hornady Unique Lube, never lets me down (nm) - Sunny, 2020-01-08, 23:08
- Meant “sizing wax” (nm) - Josh, 2020-01-08, 22:19