The blue Lock-Tite is better suited to most gunsmith duties.
Some fine monofilament fishing line inserted into the hole before the screw, then the screw, works well also.
-
What's the best way to get old red loctite out of the scope
- Rick Sim, 2017-02-22, 13:16
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I use a pistol grip soldering iron, applie to the screw head (nm) - Darryl T., 2017-02-22, 17:31
-
Apply Heat...
- ~JM~, 2017-02-22, 13:22
- Use Blue Lock-Tite, Or Fishing Line... - ~JM~, 2017-02-22, 19:11
-
Thanks! So the question is: Kitchen
- Rick Sim, 2017-02-22, 13:37
- A clothes iron placed directly on the holes - Mike Casselton, 2017-02-22, 14:10
-
Heat gun or hair dryer on high for a while
- Blake, 2017-02-22, 13:41
-
Thanks Blake! Do you still have her phone number? (nm)
- Rick Sim, 2017-02-22, 14:07
- Just e-mail it to me late tonight, after 11pm preferably (nm) - Rick Sim, 2017-02-22, 16:15
-
Thanks Blake! Do you still have her phone number? (nm)
- Rick Sim, 2017-02-22, 14:07