Reeder Custom Guns - A clothes iron placed directly on the holes

Mike Casselton
A clothes iron placed directly on the holes
Wednesday, February 22, 2017, 14:10

I've used it to unlock the glue-in benchrest action from a fiberglass stock with no damage. It works's on JB Weld also

What's the best way to get old red loctite out of the scope - Rick Sim, 2017-02-22, 13:16
- I use a pistol grip soldering iron, applie to the screw head (nm) - Darryl T., 2017-02-22, 17:31
- Apply Heat... - ~JM~, 2017-02-22, 13:22
  - Use Blue Lock-Tite, Or Fishing Line... - ~JM~, 2017-02-22, 19:11
  - Thanks! So the question is: Kitchen - Rick Sim, 2017-02-22, 13:37
    - A clothes iron placed directly on the holes - Mike Casselton, 2017-02-22, 14:10
    - Heat gun or hair dryer on high for a while - Blake, 2017-02-22, 13:41
      - Thanks Blake! Do you still have her phone number? (nm) - Rick Sim, 2017-02-22, 14:07
        Just e-mail it to me late tonight, after 11pm preferably (nm) - Rick Sim, 2017-02-22, 16:15

powered by my little forum