Reeder Custom Guns - I haven't. I will case harden it though.

Jim Taylor
I haven't. I will case harden it though.
Monday, January 15, 2024, 12:51

Easy enough to do. The procedure is outlined in the old Dixie Gun Works catalog. Oil it, wrap it in leather, wrap tin foil around it, put it in a tin can you can close and toss it in the fire for an hour.

Flat nose tool for 32 caliber bullets? - Keith, 2024-01-14, 16:24
- Making one that would slice off the nose of a jacketed - Gary Reeder, 2024-01-15, 10:34
  - They’re plated not FMJ (nm) - Keith, 2024-01-17, 16:04
  - You have to use a file and if the tool isn't hardened - Jim Taylor, 2024-01-15, 10:39
- I made one for the 9mm - Jim Taylor, 2024-01-14, 17:59
  - Great idea, how did you harden it? (nm) - Darryl T., 2024-01-15, 11:50
    - I haven't. I will case harden it though. - Jim Taylor, 2024-01-15, 12:51
      - This stuff works very well. I made some firing pins - WB, 2024-01-16, 08:11
  - I made some pointed mandrel to insert from the top - WB, 2024-01-14, 19:31
    - I have a letter from an old timer - Jim Taylor, 2024-01-14, 20:25