for a Spanish box lock 10 ga. from stainless steel. They did not peen and worked well for me. I learned a lot. My gunsmith friend teaching me used "iron wire" to hold the pieces while we heated them up and coated them.
https://www.brownells.com/tools-cleaning/paint-metal-prep/metal-bluing/surface-hardenin...
-
Flat nose tool for 32 caliber bullets?
- Keith, 2024-01-14, 16:24
-
Making one that would slice off the nose of a jacketed
- Gary Reeder, 2024-01-15, 10:34
- They’re plated not FMJ (nm) - Keith, 2024-01-17, 16:04
- You have to use a file and if the tool isn't hardened - Jim Taylor, 2024-01-15, 10:39
-
I made one for the 9mm
- Jim Taylor, 2024-01-14, 17:59
-
Great idea, how did you harden it? (nm)
- Darryl T., 2024-01-15, 11:50
-
I haven't. I will case harden it though.
- Jim Taylor, 2024-01-15, 12:51
- This stuff works very well. I made some firing pins - WB, 2024-01-16, 08:11
-
I haven't. I will case harden it though.
- Jim Taylor, 2024-01-15, 12:51
-
I made some pointed mandrel to insert from the top
- WB, 2024-01-14, 19:31
- I have a letter from an old timer - Jim Taylor, 2024-01-14, 20:25
-
Great idea, how did you harden it? (nm)
- Darryl T., 2024-01-15, 11:50
-
Making one that would slice off the nose of a jacketed
- Gary Reeder, 2024-01-15, 10:34