Reeder Custom Guns - I borrowed this to post. One note

WB
I borrowed this to post. One note
Sunday, February 21, 2021, 08:41

for using Lg. Pistol in Lg. Rifle applications. I have done it many, many times. The pocket depth to SAAMI is a bit deeper for Lg. Rifle spec. You may not fully seat the Lg. Pistol to bottom in the pocket. You run the risk of negating some firing pin inertia if it has to drive that pistol primer home a few thousandths to bottom before firing it. In my case the typically dirty pocket stops the pistol primer fine for my firing, I've never had an issue of light strikes or too short a firing pin to bust the cap. Usually the application is a rifle or strong hammer single shot handgun.

Just FYI.

[image]

Using Small Pistol Magnum and Small Rifle primers in 9mm - Jim Taylor, 2021-02-21, 07:17
- Any port in a storm. Except sometimes you have to have Mag. - WB, 2021-02-21, 08:09
  - I borrowed this to post. One note - WB, 2021-02-21, 08:41
    - As I've said before,, my Dad made a reamer for the pockets - Jim Taylor, 2021-02-21, 08:47
      - I'd like to do some reaming myself - WB, 2021-02-21, 11:39
        No. I still have a couple factory WRA that are Large Primer (nm) - Jim Taylor, 2021-02-21, 12:03
        Can anyone confirm this? - WB, 2021-02-21, 13:58
        357 Atomic - gary reeder, 2021-02-21, 15:30
        another seldom seen. 454 Casull, with large primer - gary reeder, 2021-02-21, 16:19
        I remember those - AlanT, 2021-02-21, 17:28
        these are not those. These have the full large - Gary Reeder, 2021-02-22, 11:51
        You know generally 10mm is LP and .40 is SP (nm) - WB, 2021-02-21, 16:48