gary reeder
I would highly recommend you set aside the
Sunday, May 31, 2020, 18:31

full power loads and just use the plinking load. Also Bob at Co. Custom Cartridges is a good friend but he is not a shooter of large cartridges. The "plinking" load should be the 350 grain bullet over 10 or 12 grains of Trail Boss. That is still more punch than the 44 Magnum.

All of us here on the forum have tried to warn you about the top end loads of 500 Max so you are on your own. The recoil of the cartridge is so harsh that we will no longer make any of our revolvers in the 475 Max or the 500 Max.


powered by my little forum