Reeder Custom Guns

Rex
45 super
Monday, January 06, 2020, 15:18

The issue of support at the feed ramp is the most serious thing to me. That is why they make super brass with a thicker web. I have read that if you use too heavy a spring it will do exactly as you say. In addition, some have used a stronger magazine spring, because slide speed misses the round coming up. I have a 1911 with a Rowland conversion also. It is very accurate and soft shooting with the comp,but twice it has ripped the case exactly in half, ejecting the head and leaving the front half in the barrel. upon disassembly, it falls out. I am wondering if I should try and fit a longer link to delay unlocking. It already has a 24# spring and is a pain to assemble.

45 super - Rex, 2020-01-06, 12:03
- Link for history of the 45 super - Blake, 2020-01-06, 19:49
  - Thanks for the link - Greg M., 2020-01-06, 22:29
- Is Ace Custom of Kerrville, TX still in business? - Greg M., 2020-01-06, 14:08
- I have had the same thought - Greg M., 2020-01-06, 12:09
  - I also have a .451 Detonics conversion kit - Greg M., 2020-01-06, 14:12
    - 45 super - Rex, 2020-01-06, 14:34
    - Had one in a series 70 for a long time. - Amede, 2020-01-06, 14:20
      - You say "Had" - Greg M., 2020-01-06, 14:23
        Sold it for something else, what it was I have no idea (nm) - Amede, 2020-01-06, 15:19
        I had an LAR Grizzly that I liked so tended to - Amede, 2020-01-06, 15:20
        Thanks for the response - Greg M., 2020-01-06, 21:33
        Actually had no issues, friend of mine wanted it more - Amede, 2020-01-07, 07:18
  - 45 super - Rex, 2020-01-06, 12:40
    - You can play a little without doing much - WB, 2020-01-06, 14:44
      - 45 super - Rex, 2020-01-06, 15:18
        Interesting about the mag springs I have - WB, 2020-01-06, 16:10