And when WB or I post that, Gary's blood pressure goes up.
But, I've been reloading 41 years this month. Some will think that's forever. JT will say I'm a novice. Both will be right relatively speaking.
Thinking about all the questions made me realize that I've never gotten a bad primer.
I use whatever brand I can find. I've bought Wolf Brand for $11/1000 and lots of Magtech for $12/1000. They've worked just as well as Winchester, CCI or Federal.
I do have some limits on certain cartridges. The Weatherby Cartridges, 50 Alaskan, 50-70, etc only see Federal Magnum Rifle Primers. But, beyond that I have done some silly stuff.
Lots of my 22 Hornet, 218 Bee, 25-20, 32-20, etc loading gets SP or SMP Primers. I've never had an issue with that. Small Pistol Primers are usually cheaper and easier to get.
I bought a case of CCI SRM Primers from a guy who couldn't unload them. Few cartridges require them. But, not requiring them DOES NOT mean you can't use them. I've loaded thousands of 223s with them, zero issues.
Common sense always applies. But, what books are written about and the real world isn't always synchronized.
-
All the posts about primers has gotten me to thinking...
- Huey, 2020-08-20, 05:02
-
the only primer problems I have had thru the
- Gary Reeder, 2020-08-20, 12:28
-
Hey Gary, ever try a lighter firing pin spring? (nm)
- Asa, 2020-08-20, 17:08
- Terry Murbach showed years ago that it is the hard whack - Jim Taylor, 2020-08-20, 17:51
- several times. Made no difference. (nm) - Gary Reeder, 2020-08-20, 17:47
-
Hey Gary, ever try a lighter firing pin spring? (nm)
- Asa, 2020-08-20, 17:08
- Twice in my 40 years of loading have I had primer issues - WB, 2020-08-20, 06:34
- primers - Alcorn, 2020-08-20, 06:07
-
A friend bought some Winchester 9mm ammo
- Jim Taylor, 2020-08-20, 06:03
-
I saw this myself, not that anyone would need to do it but..
- WB, 2020-08-20, 07:36
-
I wrote a pamphlet about it ..
- Jim Taylor, 2020-08-20, 07:40
-
Ive never tried it but it might be fun to say you did
- WB, 2020-08-20, 08:08
-
I did it in Africa ... used a tin cooking pan
- Jim Taylor, 2020-08-20, 10:28
- Really neat! I’ve never tried. (nm) - WB, 2020-08-20, 11:23
-
I did it in Africa ... used a tin cooking pan
- Jim Taylor, 2020-08-20, 10:28
-
Ive never tried it but it might be fun to say you did
- WB, 2020-08-20, 08:08
-
I wrote a pamphlet about it ..
- Jim Taylor, 2020-08-20, 07:40
- I've had factory ammo not work too. Also, have had brass... - Huey, 2020-08-20, 06:13
-
I saw this myself, not that anyone would need to do it but..
- WB, 2020-08-20, 07:36
-
the only primer problems I have had thru the
- Gary Reeder, 2020-08-20, 12:28