Light 357 load

Paul
[subject]
Saturday, August 10, 2019, 10:46 (11 days ago)

My wife has a SP101 357 that I want to make some light 125gr xtp loads for. Been shooting 38's but with poor accuracy, plus the crud ring. Mag primers or not?? Thanks all

I use 21 grains of W296

Randy Barnett
[subject]
Saturday, August 10, 2019, 10:51 (11 days ago) @ Paul

with a 125 grain XTP. Not necessarily a light load.

125 gr. JHP with 21 gr. WC820

Jim Taylor
[subject]
Saturday, August 10, 2019, 11:30 (11 days ago) @ Randy Barnett

(Military Surplus H110) from a S&W 340

[image]

wow

lynn
[subject]
Saturday, August 10, 2019, 15:59 (11 days ago) @ Jim Taylor

- No text -

I’m liking Titegroup for most anything

Brent Clark
[subject]
Saturday, August 10, 2019, 11:11 (11 days ago) @ Paul

I’m finding that Titegroup does about everything I would need from plinkers on up. Seems to be very consistent and position insensitive. Meters well in uniflow and Dillion powder measures. I use standard primers with it.

Try a heavier bullet and low end speeds for the data.

Gus S.
[subject]
Saturday, August 10, 2019, 11:17 (11 days ago) @ Paul

Personally, I've had 125s give me a fit sometimes. I've always been able to make 180s down to 150s shoot well with little effort. That may just be a testament to my own patience, though. Low end loads should mitigate the recoil a good bit.

125 XTP's

Paul
[subject]
Saturday, August 10, 2019, 11:20 (11 days ago) @ Gus S.

I have 1000 of them.

powered by my little forum