I am now at a little over 3 weeks since the surgery on my right hand and I am not sure I can handle the recoil of my "baby", my 9" 41 GNR or my little stainless 9" 356 GNR. The stitches were taken out last week so everything is still tender.
I am going to get my guys to build me a couple of TC barrels. The 257 Raptor barrel is one of my favorite ones. I took a cow Yak at the HHC with it a couple of years ago. The 7 GNR has been my gun of choice for many years for the longer range shots. I will try several and see which ones work best. I usually go for a Bison or some big critter so I have to take that into consideration. The 41 GNR has never failed me yet on well over a dozen large Bison type animals but I don't want to go down too low in power. So I have 3 weeks to get ready.
-
I have 3 weeks to decide on a gun for the HHC
- Gary Reeder, 2019-09-07, 13:19
-
Not my pic
- Asa, 2019-09-07, 17:27
- that wouldn't work. 99% of my shots are standing offhand (nm) - gary reeder, 2019-09-07, 18:38
- The 257 Raptor kills way beyond what it looks like on paper - Blake, 2019-09-07, 15:14
- 41 GNR with a brake? - steve todd, 2019-09-07, 15:14
-
If a could only take two..
- Gus S., 2019-09-07, 15:07
- the 'Stanley' should not be overlooked... (nm) - hume'r, 2019-09-07, 18:27
-
Yea... I didn't read all of that first post.
- Gus S., 2019-09-07, 15:37
- Oops, me too! (nm) - steve todd, 2019-09-07, 15:42
-
257 Raptor
- Brian T, 2019-09-07, 15:04
-
I used a 100 grain bullet with that old weird hard point.
- Gary Reeder, 2019-09-07, 15:54
- Dont crimp that one in the Cannelure! LOL! - Asa, 2019-09-07, 17:17
-
I used a 100 grain bullet with that old weird hard point.
- Gary Reeder, 2019-09-07, 15:54
- make sure the critter can not swim (nm) - LYNN, 2019-09-07, 14:24
- ensure there's a pond nearby (nm) - JB, 2019-09-07, 14:00
-
Go the black powder route. (nm)
- John W, 2019-09-07, 13:54
- black powder just doesn't interest me at all. (nm) - gary reeder, 2019-09-07, 19:10
- Don't over do it. (nm) - Andy S, 2019-09-07, 13:35
-
Not my pic
- Asa, 2019-09-07, 17:27