and when I feel a slight bit of resistance I stop and check it. This is on a Dillon which can really screw up the timing and such. I stop and take all the brass out of the machine, empty the case with powder in it and start all over. It is a pain but it does happen. A 9mm case in a 10mm happens too.
-
That'll teach me!
- Jim Taylor, 2019-05-18, 15:24
- Tumbler media is a PITA, I use hard white rice - Rsim, 2019-05-19, 10:38
- That a good one! I deprime lots of Spiders. (nm) - WB, 2019-05-19, 06:34
-
The .357 MCUNHVTRPF!
- Marco, 2019-05-19, 03:26
- Now you know, - IC, 2019-05-19, 06:13
- every once in a while I will miss a 10mm case in a 44 mag - Gary Reeder, 2019-05-18, 19:15
- Oops (nm) - ChrisG, 2019-05-18, 16:59
-
We all miss things. (nm)
- IC, 2019-05-18, 16:17
- My buddy had accidently chambered a - Derek, 2019-05-18, 18:47