I cut 100 .45 Colts to a bit over .930" today. I used a tubing cutter, holding the cartridges between small oak boards in my vise.
Once they were cut I then had to expand them so the cutter guide would center them.
My next step will be to trim them to .900". Once they are chamfered and deburred I will prime them and load them.
I have 2 bullets I will load .. the blunt flatnose bullet and the roundnose bullet.
-
Making 480 Achilles cartridges
- Jim Taylor, 2019-05-15, 15:48
-
Nice work, but I gotta ask,
- Grover Sr, 2019-05-15, 16:29
- I am gonna add that to my name .. - Jim Taylor, 2019-05-17, 07:30
-
Undaunted
- Curt, 2019-05-15, 18:01
- Well now, that's most illuminating. These guys - Grover Sr, 2019-05-15, 20:25
-
That's it! Thanks Curt. (nm)
- Jim Taylor, 2019-05-15, 19:47
- The beauty of those old Outlaw's design is - WB, 2019-05-16, 10:58
-
Nice work, but I gotta ask,
- Grover Sr, 2019-05-15, 16:29