Reeder Custom Guns - I use soem of them in a number of cal. but I have

Lynn
I use soem of them in a number of cal. but I have
Friday, March 22, 2019, 06:30

found that they can be harder to resize and there can be a diameter difference-- I make .358 wins out of nickeled .30.o6 but found that the neck diameter was excessive after necked down a batch. Unplated brass is not problem. Might still work if I necked up .308, but I have plenty of brass now.

Any problem loading the same load in a brass case and a - Lymey, 2019-03-21, 18:50
- I use soem of them in a number of cal. but I have - Lynn, 2019-03-22, 06:30
- yes, drop your load back half a grain or even 1 grain. - Gary Reeder, 2019-03-21, 19:34
  - Thanks guys. These are for a 7mm GNR thats going to Africa. (nm) - Lymey, 2019-03-22, 12:32
  - Even in the higher volume cases i.e.: 45-70 - Rsim, 2019-03-22, 06:31
- I’ve found the nickel plated cases have less capacity - Brent Clark, 2019-03-21, 19:32
- Should just be nickel plated brass (nm) - Leadhound, 2019-03-21, 19:00