to fit in the cylinder. 18 or 19 grains of 296 or H-110 would be a good place to start.
-
Load suggestions
- Ken Patton, 2018-07-21, 13:13
-
if it is in a revolver, make sure it is not too long
- Gary Reeder, 2018-07-21, 13:18
-
Load suggestions
- Ken Patton, 2018-07-21, 14:08
-
I like, with a 180 gr., 20.0 gr. 4227. So
- WB, 2018-07-21, 16:43
- Load suggestions - Ken Patton, 2018-07-21, 18:35
-
I like, with a 180 gr., 20.0 gr. 4227. So
- WB, 2018-07-21, 16:43
-
Load suggestions
- Ken Patton, 2018-07-21, 14:08
-
if it is in a revolver, make sure it is not too long
- Gary Reeder, 2018-07-21, 13:18