i use 27 grains IMR4227 with Winchester large pistol primers and Hornady brass. Mid range load that works great on jackrabbits. With your lighter bullet, i would start with that 27 grain load, and then try 28 grains. Will probably lead a little without a gascheck.
-
Got a big box of bullets enroute for the 475!
- Gus S., 2018-07-20, 19:25
-
With a 375 grain gc bullet in 475 Linebaugh
- steve todd, 2018-07-20, 21:59
-
That's in line with what I've gotten figured..
- Gus S, 2018-07-22, 06:14
- Handloads .com has data too, but not for 340s (nm) - steve todd, 2018-07-22, 21:22
-
That's in line with what I've gotten figured..
- Gus S, 2018-07-22, 06:14
-
use the upper end loads for the 480. Just make sure
- Gary Reeder, 2018-07-20, 19:29
- Will Do. (nm) - Gus S, 2018-07-21, 18:43
-
Hodgdonreloading.com has 475 Linebaugh data (nm)
- steve todd, 2018-07-20, 22:38
-
You can check loadata.com also (nm)
- Alcorn, 2018-07-21, 02:30
- Oops, loaddata.com (nm) - Alcorn, 2018-07-21, 02:40
-
You can check loadata.com also (nm)
- Alcorn, 2018-07-21, 02:30
-
With a 375 grain gc bullet in 475 Linebaugh
- steve todd, 2018-07-20, 21:59