The problem is the loading gate recess. The 357 magnum case that the 321 is based on is too wide to normally go thru the recess without taking a lot of metal out. But that entails breaking into the opening where the transfer bar goes. We are trying to re-weld the recess and have just enough opening to get the 357 rim thru the opening. It works fine with an old model that does not have the transfer bar but is still causing problems in the new model.
-
Gary, I know I have seen mention of some new
- Jericho, 2018-07-19, 12:03
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
the 250 GNR isn't one of the real new ones as it has
- Gary Reeder, 2018-07-19, 13:08
-
.321
- Frank Simon, 2018-07-19, 14:49
-
.321gnr is a .357 necked down to .308. You can also shoot
- Jeff Spencer, 2018-07-19, 15:18
-
.321/ next question
- Frank Simon, 2018-07-19, 16:08
-
we are experimenting with a Trail Gun in 321 GNR right now
- Gary Reeder, 2018-07-19, 16:17
- 321 - Frank Simon, 2018-07-19, 18:34
-
Have an OM just waiting... (nm)
- Huey, 2018-07-19, 16:28
- 321 - Frank, 2018-07-20, 07:00
-
we are experimenting with a Trail Gun in 321 GNR right now
- Gary Reeder, 2018-07-19, 16:17
-
.321/ next question
- Frank Simon, 2018-07-19, 16:08
-
.321gnr is a .357 necked down to .308. You can also shoot
- Jeff Spencer, 2018-07-19, 15:18
- Think my next one will be a 321 GNR (nm) - Da Duke, 2018-07-19, 13:39
-
.321
- Frank Simon, 2018-07-19, 14:49
-
the 250 GNR isn't one of the real new ones as it has
- Gary Reeder, 2018-07-19, 13:08