Reeder Custom Guns - I've had a couple of JD's barrels but

WB
I've had a couple of JD's barrels but
Friday, March 23, 2018, 06:13

Even mag-na-ported they whacked my knuckles. It's about more than I want to mess with, performance or not. I have a .35 on the full length .444 run up a .358 win sizer. Ugly looking ctg. but works ok, I shorten the necks to .358 length making them .356 Win.

I feel the .308 case head size is on the large side for the Contender unless you watch pressures and keep them backed off. That's why I like the slightly smaller .30/30 case custom cartridges. The .355 is an easy sound one. The performance of the .35 Rem rifles are legendary and that's what the .355 GNR handgun produces easily.

Something interesting to chew on. - WB, 2018-03-21, 13:23
- Interesting observation from today's shooting - Mike Casselton, 2018-03-22, 14:00
  - It's fun to ponder for sure. Love it. (nm) - WB, 2018-03-22, 21:09
- After reading your post I was - John W, 2018-03-22, 03:18
  - I read of an old wildcat the Eastern hunters dreamed up - WB, 2018-03-22, 06:49
    - I am rethinking some stuff, so to speak. - John W, 2018-03-22, 15:18
      - I've had a couple of JD's barrels but - WB, 2018-03-23, 06:13
- I would like to see a picture of the "firing device"? - JPL, 2018-03-21, 18:25
- WB, I think the test was to demonstrate... - RA, 2018-03-21, 14:14
  - A tapered case pushing 2000 fps force on the breech face?! - WB, 2018-03-21, 14:38
    - perhaps the reason for an increase - Todd C, 2018-03-21, 16:59
      - Off topic. Do have a website set up? Would like to buy some. - Jeff Spencer, 2018-03-21, 17:36
        Yes, I wish I could get some 250gr GC .401” bullets (nm) - O’ Gary, 2018-03-21, 17:44
        I have some with bullets and data for the 401 based GNR 's, - Sean Harper, 2018-03-22, 10:38
        I can attest the bullet design is tops! - WB, 2018-03-21, 18:30
    - Even though the "non-tapered" case has little or no push on - RA, 2018-03-21, 14:58
      - You are right, the info is so dramatic I got excited. - WB, 2018-03-21, 18:31