Huey
I have not had a case set back yet, PERIOD...
Friday, February 23, 2018, 15:32

In fact, I've reloaded the same six cases eleven times. The kicker is, I've never resized them.

I run the cases into the die 3/16" just to hold the bullet. To decap I use the Lee Universal Decap Die.

When I chamber the reloaded ammo, I still have the same clearance between the rim and recoil plate.

I have few explanations for this except a perfect reamer cut. I mean ZERO movement of the shoulder.

I've pushed loads till they were a little sticky and experienced some primer flow around the firing pin. But, still ZERO movement of the shoulder.

Not what I was expecting from the 25-20 with heavy bullets.


powered by my little forum