Reeder Custom Guns - Hard to screw it up, and I've tried!

WB
Hard to screw it up, and I've tried!
Tuesday, October 31, 2017, 17:42

Once I forgot the time/temp and literally melted the lead inside the coated shell! Only on one or two where the shell had a void some leaked out a bead. Otherwise I'd have never known. It was way too hot! Can't trust the dial.

Coated Bullets- I'll open this can of worms... - Huey, 2017-10-31, 16:14
- maybe that is what the new Alliant powder I - Gary Reeder, 2017-10-31, 22:13
  - The coating is a polymer. But, I've had no trouble... - Huey, 2017-11-01, 03:11
- Been coating for 3 years. Never lube again. (nm) - Randy Barnett, 2017-10-31, 17:28
- I have had excellent results, need to start doing my own (nm) - Brian T, 2017-10-31, 16:25
  - I just don't have time to cast. But, results have... - Huey, 2017-10-31, 16:29
    - Hard to screw it up, and I've tried! - WB, 2017-10-31, 17:42
      - Wonder how that works on a Glock barrel. (nm) - SPB, 2017-10-31, 18:10
        I hear that type of rifing need a larger bullet so - WB, 2017-10-31, 19:12