Loosen the screw and the sight blade comes out. Measure it from the bottom of the blade to the top of the gold bead and let me know the height and I can get you a green or red fiber optic blade out. They are $45 plus a buck or two for shipping. Don't measure the little dog leg part that goes down in the base, just the part above the base. Without seeing the gun, the only way is to measure the hole spacing. A Leupold base has the 2 front holes that measure 1.05" apart. If you have a way to measure them, see if they are the same.
-
Gary 410 GNR
- Tim, 2017-09-18, 14:22
-
Tim, there is an Allen screw in the front of the base
- Gary Reeder, 2017-09-18, 16:22
-
Gary the front sight measured. .325"
- Tim, 2017-09-18, 16:50
- that is close enough. Give Colleen a call. (nm) - Gary Reeder, 2017-09-18, 17:42
-
Gary the front sight measured. .325"
- Tim, 2017-09-18, 16:50
-
Tim, there is an Allen screw in the front of the base
- Gary Reeder, 2017-09-18, 16:22