Casting .41's
Since I was already casting and knew I was getting short on bullets for the .41 Magnum I dug out my old NEI mold and ran off a couple hundred. It's 230 grains .. flat point. I size them to .410" and they work well. I usually load 15.5 gr. 2400 but am working a bit lighter load using 8.0 gr. of Unique.
![[image]](images/uploaded/2025102920574769027fcb3ee7b.jpg)
![[image]](images/uploaded/2025102920580269027fda223cc.jpg)
![[image]](images/uploaded/2025102920582369027fef04bbe.jpg)
I shot these targets a couple years ago with this bullet and sixgun.
![[image]](images/uploaded/202510292100026902805225c9c.jpg)
![[image]](images/uploaded/202510292100206902806407217.jpg)
![[image]](images/uploaded/20251029210057690280893108f.jpg)
![[image]](images/uploaded/2025102923012569029cc53bcce.jpg)
![[image]](images/uploaded/2025102923035469029d5acddcb.jpg)
![[image]](images/uploaded/2025102923040869029d68b2793.jpg)