Since I was already casting and knew I was getting short on bullets for the .41 Magnum I dug out my old NEI mold and ran off a couple hundred. It's 230 grains .. flat point. I size them to .410" and they work well. I usually load 15.5 gr. 2400 but am working a bit lighter load using 8.0 gr. of Unique.
![[image]](images/uploaded/2025102920574769027fcb3ee7b.jpg)
![[image]](images/uploaded/2025102920580269027fda223cc.jpg)
![[image]](images/uploaded/2025102920582369027fef04bbe.jpg)
I shot these targets a couple years ago with this bullet and sixgun.
![[image]](images/uploaded/202510292100026902805225c9c.jpg)
![[image]](images/uploaded/202510292100206902806407217.jpg)
![[image]](images/uploaded/20251029210057690280893108f.jpg)
-
Casting .41's
- Jim Taylor, 2025-10-29, 14:01
![[*]](themes/default/images/complete_thread.png "Open whole thread")
-
Jim ~ about the 41...
- Dave H., 2025-10-29, 15:56
- .41 Mag - AlanT, 2025-10-29, 19:37
- I am not a fan of heavy bullets in the .41 ... - Jim Taylor, 2025-10-29, 16:07
- Good lookin gun and bullets (nm) - Sean Harper, 2025-10-29, 14:11
-
Jim ~ about the 41...
- Dave H., 2025-10-29, 15:56