rifle forend will fit the large diameter full bull barrels? The ML forend is too small diameter barrel channel without extensive modding and has those funky screws too.
The flex tech looks larger and somewhat flimsy, forgiving, to begin. If it's close I don't mind hogging it out to custom fit.
12 ga. forends are CRAZY priced right now. Like $300-400 for the forend only! I could buy a complete gun and sell the unneeded pieces cheaper. Good grief, some folks are just looney. I've found no good info on the net. One expert says the ML is the same as the 12 ga. channel. That is NOT true. Plus there is a 500x209, 20 ga., 12 ga, and 12 ga. ML forend, all with specific factory part numbers.
-
Can anyone confirm that a "Prohunter Flex-tech"
- WB, 2025-09-03, 14:56
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- I think I’ll go ahead and try the set. Even if it needs - WB, 2025-09-04, 06:35