Reeder Custom Guns

Dave338
322/335
Saturday, August 09, 2025, 21:32

I have thought about going to a 110 grain bullet, but if I can get to 2400 2500 fps with 125 grain id be happy. I've also been looking at the 322 335 powders, I'll probably give one of those a shot. I'll give the 338 a try with max load, I did notice im.a little low.on the powder charge on that one, its very accurate with that load, I didn't think it would drop the velocity that much tho.

Under performing - Dave338, 2025-08-09, 17:53
- Your 36 gr of H4895 is LOW, mine takes 39 before I get - Sean Harper, 2025-08-11, 05:25
  - Powder - Dave338, 2025-08-11, 08:07
    - 30 GNR -- O.A.L is 2.950" with a 150gr Nosler (nm) - Sean Harper, 2025-08-11, 10:54
    - By seating the bullet longer it increases capacity - WB, 2025-08-11, 09:43
- What barrel length?? - Sean Harper, 2025-08-11, 05:11
- 322/335 - Dave338, 2025-08-09, 21:32
  - I had expansion issues with .338 bullets - WB, 2025-08-10, 07:01
    - Another question - Dave338, 2025-08-10, 10:52
      - Yeah I’ve had a few, a .35 .336 Marlin too. - WB, 2025-08-10, 14:01
    - Expansion - Dave338, 2025-08-10, 10:27
      - I use the Nosler Ballistic Tip in the .30 GNR - WB, 2025-08-10, 18:25
- Shoot I’m separated from my data right now - WB, 2025-08-09, 19:14
  - Blc 2 - Dave338, 2025-08-09, 21:34
  - Normally I would agree that accuracy over velocity - Dave338, 2025-08-09, 19:44
    - I think I also used H322 and H335 in .30 GNR - WB, 2025-08-09, 20:12