I put 6 primed pieces of brass in it and pointed it at a post. Tried to pull back on the hammer and let it slip. Once you reach half cock it locks in place. If I pull back and release it before full cock it stops at half cock position. I can let it slip just before reaching half cock but it is a very short drop and the cylinder has not been fully rotated into firing position so the hammer strike is between chambers. The big deal is If I have my finger on the trigger with just slight pressure fully cocking the hammer it drops as soon as I take my thumb off and kaboom, primer fires every time.
-
NOT defending Baldwin could the gun have
- Lynn, 2021-12-02, 16:23
- My Uberti Colt Clone - Grover Sr, 2021-12-03, 12:17
-
the gun was a single action revolver, a Colt clone
- Gary Reeder, 2021-12-02, 16:29
- Took this long to be “coached” - Jk, 2021-12-03, 08:57
- I read this morning - TM, 2021-12-03, 08:22
- ok thanks boss I had of that,,he is still a liberal (nm) - Lynn, 2021-12-02, 21:03
-
an old gentleman that knows a lot more about Colts
- Gary Reeder, 2021-12-02, 17:31
- I have never been around and old model--- he pulled (nm) - Lynn, 2021-12-02, 21:04
-
My thought is
- Ed, 2021-12-02, 19:47
- Ed, that is what has been in the news for the past several - gary reeder, 2021-12-02, 21:26