Reeder Custom Guns

BUCKWHEAT
MY METHOD
Thursday, September 23, 2021, 04:19

WAS THE SAME -- EXCEPT OF COURSE WITHOUT THE X/Y INDICES !!! ROFLMAO
I FIGURED I'D JUST DO A BIT -- TAKE IT OUT - CHECK IT IN THE SHELLHOLDER & WHEN I GOT TO THE POINT WHERE I FELT I WAS PRETTY CLOSE - SEE WHAT IT DID IN THE GUN
BUT ALAS -- JUST THINKING ABOUT IT WOUND UP BEING ALL THE FIDDLING I WANTED TO DO
BETTER THINGS TO DO THAN INDULGE ANY FURTHER OC DISORDERS !!
LIKE SHOOTING PILES OF WOOD

6.5 GNR - Ronnie P, 2021-09-22, 11:29
- There are some other “wildcat” 6.5 on the .30-30 - WB, 2021-09-22, 12:48
  - WB - BUCKWHEAT, 2021-09-22, 14:07
    - Just chucked them in the lathe, turned rims till - WB, 2021-09-22, 16:05
      - KINDA FIGURED THAT - BUCKWHEAT, 2021-09-22, 16:26
        SETUP IS WHAT I MEANT - BUCKWHEAT, 2021-09-22, 16:28
        I figured a method on the chuck depth - WB, 2021-09-22, 17:44
        MY METHOD - BUCKWHEAT, 2021-09-23, 04:19
        It took me a while to understand I was not - WB, 2021-09-23, 07:56
        I CANT SEE IT ANY OTHER WAY - BUCKWHEAT, 2021-09-23, 08:24
      - I made up about 40. 20 fir 6.5 Merrill - WB, 2021-09-22, 16:11