Reeder Custom Guns - KINDA FIGURED THAT

BUCKWHEAT
KINDA FIGURED THAT
Wednesday, September 22, 2021, 16:26

BUT ALL I HAVE NOW IS AN 70 YEAR OLD 5 FOOT WOOD LATHE & I FIGURE I CAN DO IT BUT THE STUP REQUIRED TO DO IT IS QUITE A HASSLE

6.5 GNR - Ronnie P, 2021-09-22, 11:29
- There are some other “wildcat” 6.5 on the .30-30 - WB, 2021-09-22, 12:48
  - WB - BUCKWHEAT, 2021-09-22, 14:07
    - Just chucked them in the lathe, turned rims till - WB, 2021-09-22, 16:05
      - KINDA FIGURED THAT - BUCKWHEAT, 2021-09-22, 16:26
        SETUP IS WHAT I MEANT - BUCKWHEAT, 2021-09-22, 16:28
        I figured a method on the chuck depth - WB, 2021-09-22, 17:44
        MY METHOD - BUCKWHEAT, 2021-09-23, 04:19
        It took me a while to understand I was not - WB, 2021-09-23, 07:56
        I CANT SEE IT ANY OTHER WAY - BUCKWHEAT, 2021-09-23, 08:24
      - I made up about 40. 20 fir 6.5 Merrill - WB, 2021-09-22, 16:11

powered by my little forum