Reeder Custom Guns - Thanks for the thought Mike. Not a huge .380 fan but

WB
Thanks for the thought Mike. Not a huge .380 fan but
Monday, February 22, 2021, 15:37

their have their place. I mean it's the size of a .25 ACP of back when. I know lots of guys have those Rugers. Sold like hotcakes.

You can hardly buy any ammo right now but brass is around. I don't have a dedicated .380 weight mould but the manual says any 9mm will work fine. I'm curious as to the internal range of depth in the case. 9mm shuts you down pretty quick. I load 158 gr. fine in 9mm but it sticks out the front some. I have a 147 gr. mould that has a bit of a boattail on the bullet and I know why! lol

I’ve a need to load some .380 ACP. - WB, 2021-02-22, 12:39
- I have a Lee 6 cavity .356- 95 grain mold - steve todd, 2021-02-22, 18:28
  - Thanks Steve, hang onto that thought - WB, 2021-02-23, 06:51
    - hang on to those primers. You won't be able to replace - Gary Reeder, 2021-02-23, 11:00
- WB projectiles - Mike horn, 2021-02-22, 15:32
  - Thanks for the thought Mike. Not a huge .380 fan but - WB, 2021-02-22, 15:37
- I have some extra 90gr Gold dots if you need some. (nm) - Sean Harper, 2021-02-22, 14:09
  - Thanks kindly Sean. You know I kind of have adopetd - WB, 2021-02-22, 15:09
- BUT - JT, 2021-02-22, 13:23
  - ACTUALLY - JT, 2021-02-22, 13:25
    - .32 ACP is as small as I've done. - WB, 2021-02-22, 14:49
      - Doesn't look like brass... ¿? (nm) - backroadsrambler, 2021-02-22, 14:57
        Just patina and bad light, it’s brass all right. - WB, 2021-02-22, 16:28
        Didn't figure you'd get it wrong but had to ask! - backroadsrambler, 2021-02-22, 16:32