Was able to get 500 brass for $40. Got primers and powder. Bullets, I guess I’ll just use 9mm. I think I have some 121/124 gr. Lyman manual has some data. The little teeny gun is a locked breach gun but I certainly will stick to the manual’s data. Small things break easy. Listed velocity shows 750-950 fps from fastest to just fast powders. The .380 looks to be about 1/3 less powder for the same bullet compared to the .38 S&W. I can see it with its greater capacity.
-
I’ve a need to load some .380 ACP.
- WB, 2021-02-22, 12:39
-
I have a Lee 6 cavity .356- 95 grain mold
- steve todd, 2021-02-22, 18:28
-
Thanks Steve, hang onto that thought
- WB, 2021-02-23, 06:51
- hang on to those primers. You won't be able to replace - Gary Reeder, 2021-02-23, 11:00
-
Thanks Steve, hang onto that thought
- WB, 2021-02-23, 06:51
-
WB projectiles
- Mike horn, 2021-02-22, 15:32
- Thanks for the thought Mike. Not a huge .380 fan but - WB, 2021-02-22, 15:37
-
I have some extra 90gr Gold dots if you need some. (nm)
- Sean Harper, 2021-02-22, 14:09
- Thanks kindly Sean. You know I kind of have adopetd - WB, 2021-02-22, 15:09
-
BUT
- JT, 2021-02-22, 13:23
-
ACTUALLY
- JT, 2021-02-22, 13:25
-
.32 ACP is as small as I've done.
- WB, 2021-02-22, 14:49
-
Doesn't look like brass... ¿? (nm)
- backroadsrambler, 2021-02-22, 14:57
-
Just patina and bad light, it’s brass all right.
- WB, 2021-02-22, 16:28
- Didn't figure you'd get it wrong but had to ask! - backroadsrambler, 2021-02-22, 16:32
-
Just patina and bad light, it’s brass all right.
- WB, 2021-02-22, 16:28
-
Doesn't look like brass... ¿? (nm)
- backroadsrambler, 2021-02-22, 14:57
-
.32 ACP is as small as I've done.
- WB, 2021-02-22, 14:49
-
ACTUALLY
- JT, 2021-02-22, 13:25
-
I have a Lee 6 cavity .356- 95 grain mold
- steve todd, 2021-02-22, 18:28