Reeder Custom Guns - The Ruger SR1911 in 10mm

John W
The Ruger SR1911 in 10mm
Saturday, January 16, 2021, 05:01

seems to have some tight tolerances. The design does not have a bushing. The barrel is flared and locks against the slide.

So I do believe it is a tad fussier than an old 1911 used in service.

1911 lubricant question - John W, 2021-01-14, 17:21
- I am not telling anyone to do this .. just what I do .. - Jim Taylor, 2021-01-15, 09:38
  - The Ruger SR1911 in 10mm - John W, 2021-01-16, 05:01
- Lube - Mike horn, 2021-01-15, 09:21
- For Lube Geeks... - ~JM~, 2021-01-15, 08:54
  - Thanks ~JM~ (nm) - azj, 2021-01-15, 09:17
- for sure keep all oil totally away from it - gary reeder, 2021-01-14, 19:56
  - On rare occasion I use some modern lubes - WB, 2021-01-15, 07:50
- Mobil 1 syn motor oil works very well ! (overkill) (nm) - azj, 2021-01-14, 17:46
  - any kind of oil is the worse thing you can put on any gun - gary reeder, 2021-01-14, 22:05
    - Thanks Gary. (nm) - azj, 2021-01-15, 04:10

powered by my little forum