to get perfect sized brass. Normally I go from 378 to the 350 GNR then 338 GNR and then 310. That way I don't lose any 405 brass.
-
Case forming attempt gone wrong!
- Larryh, 2020-11-26, 11:03
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- If you had a .405 you could blow that back out too! (nm) - WB, 2020-11-27, 07:17
-
if you were WB you would cut that case just below
- gary reeder, 2020-11-26, 21:30
-
Looking like it might make a dandy all brass .410 shotshell!
- WB, 2020-11-27, 06:47
- Or blow out 303 British for 405 short? (nm) - steve todd, 2020-11-27, 08:38
-
Looking like it might make a dandy all brass .410 shotshell!
- WB, 2020-11-27, 06:47
- 310 - Timothy Dollar, 2020-11-26, 19:15
-
you may have to go down even more than 378
- gary reeder, 2020-11-26, 16:17
- I’ll do that Gary, thanks! (nm) - Larryh, 2020-11-26, 18:48
-
It looks like the mouth is still too wide at
- O’Gary, 2020-11-26, 15:38
- I went from 405 to 310 on the one shown. - Larryh, 2020-11-26, 15:49
- It does look happy... (nm) - ChrisG, 2020-11-26, 12:15
-
Curious... is that a .450 Marlin w/the belted case? (nm)
- azj, 2020-11-26, 11:44
- It is. I have a 1895MR. Love it! (nm) - Larryh, 2020-11-26, 11:48