Reeder Custom Guns - the lower portion is .558 and is .0120 thick.

Gary Reeder
the lower portion is .558 and is .0120 thick.
Thursday, September 17, 2020, 10:32

and sometimes these differ. Most of Lyman's shell holders are a bit wider at the top and the Lees tend to be smaller at the top. There doesn't seem to be any concrete measurements these days.

Can someone give outside dimensions of shellholder please! - Asa, 2020-09-17, 09:22
- .8135" (nm) - JT, 2020-09-17, 10:02
  - RCBS (nm) - JT, 2020-09-17, 10:03
    - Thanks JT, I'm also needing the lower portion - Asa, 2020-09-17, 10:13
      - the lower portion is .558 and is .0120 thick. - Gary Reeder, 2020-09-17, 10:32
      - MIDDLE: .4335"; BOTTOM: 5585" (nm) - JT, 2020-09-17, 10:30
        Awesome! You're fantastic! (nm) - Asa, 2020-09-17, 10:30
        measuring several the .558 seems to be normal for the part - Gary Reeder, 2020-09-17, 10:34
        Thank you fellas! - Asa, 2020-09-17, 11:02