Contender are long gone. There are still some good people at TC that would be glad to help you but they are up on the G-2 and Encore. There is a small screw on some of the older Contenders behind the trigger that can be set to tighter tolerances and if you go too far it won't cock at all. On some newer guns the screw is inside the frame just above the trigger. That is to give you a lighter or harder trigger pull and that may be what you are referring to....maybe.
-
Contender Tech?
- ~JM~, 2020-09-15, 16:43
- JM found his name & # - Grover Sr, 2020-09-16, 11:53
-
Bel iui eve it or not the LASC
- Grover Sr, 2020-09-15, 21:33
- That should gave been believe it or not (nm) - Grover Sr, 2020-09-15, 22:05
-
Found his email address
- Grover Sr, 2020-09-15, 21:35
-
Thank you. (nm)
- ~JM~, 2020-09-16, 07:34
- You are welcome! - Grover Sr, 2020-09-16, 09:29
-
Thank you. (nm)
- ~JM~, 2020-09-16, 07:34
-
good luck. The folks at TC that know about the original
- Gary Reeder, 2020-09-15, 17:19
- That Sparks A Memory... - ~JM~, 2020-09-15, 17:57