Reeder Custom Guns - Star PD Mags ?

~JM~
Star PD Mags ?
Sunday, March 29, 2020, 22:19

I have 3 after-market magazines for the Star PD. I believe they are Triple K mags. One 6 rd. & two 10 rd. They do not function reliably. I believe the follower (flat steel type) causes the problem. The rounds do not approach the feed ramp with enough upward angle to feed up into the chamber. Are there other followers with a more rounded profile that could be retro fit? How about mag spring replacement?

I found this article: http://www.alpharubicon.com/leo/starpdserger.htm
It states that S&W 457 magazines will function in the PD.

Anyone have any other advice/experience to share?

Thank you.

Star PD Mags ? - ~JM~, 2020-03-29, 22:19
- S&W 457 Mags - Erik Stenberg, 2020-03-31, 07:46
  - S&W 457 Mags - ~JM~, 2020-03-31, 08:01
    - PD Magazines - Erik Stenberg, 2020-03-31, 09:11
- The PD was rated by one of the Consumer magazines as - Gary Reeder, 2020-03-30, 11:04
- Now you know why std. mags are $65+ - WB, 2020-03-30, 07:04
  - response to WB's "ugly" remark. Here is a man that thinks - gary reeder, 2020-03-30, 19:47
    - You silly goobers, I said Glock was ugly, not the PD - WB, 2020-03-30, 22:07
      - I MAY BE A GOOBER, BUT I'M NOT SILLY! (nm) - ~JM~, 2020-03-31, 11:36
      - Thunderstorm resulted in two posts. (nm) - WB, 2020-03-30, 22:22
    - I saind Glock was ugly, not the PD - WB, 2020-03-30, 21:51
      - I do know that is the first 2 paragraphs you have - gary reeder, 2020-03-30, 23:55
  - UGLY? I Don't Think So. (nm) - ~JM~, 2020-03-30, 18:48
    - I agree. (nm) - IC, 2020-03-30, 19:19
  - $65 is not expensive for a good reliable magazine. Is your - Gary Reeder, 2020-03-30, 11:07
  - I had Gary do up a PD for me awhile ago. It’s - Drdougrx, 2020-03-30, 08:11
    - What's a "sprucing up" run - Doctor, 2020-03-30, 14:26
      - according to what all you want done. The - Gary Reeder, 2020-03-30, 17:25
        I Have Two OEM PD Mags - ~JM~, 2020-03-30, 18:47