To Sprinco website and calculate the power factor of the load you want to shoot. Order the right guide rod and be done. Nothing to ware out in your lifetime and no crazy heavy recoil spring to beat the slide up with. Just saying
-
Speaking of home Gunsmithing challenges...
- WB, 2020-01-14, 19:26
-
Or you could go
- Blake, 2020-01-15, 14:05
- You are so practical, and usually right. (nm) - WB, 2020-01-16, 17:43
-
My hero! And all without a dremel or duck tape! (nm)
- Drdougrx, 2020-01-15, 06:19
-
I did use my Swiss Army a little. To assist plunger detents
- WB, 2020-01-15, 07:04
-
Just went through a similar task....was shooting my reeder
- Drdougrx, 2020-01-15, 07:29
-
Back in teh 1980's I was assembling an AR in my shop
- WB, 2020-01-15, 08:23
- Yep.....there’s a buffer retainer and spring for - Drdougrx, 2020-01-15, 10:42
-
Back in teh 1980's I was assembling an AR in my shop
- WB, 2020-01-15, 08:23
-
Just went through a similar task....was shooting my reeder
- Drdougrx, 2020-01-15, 07:29
- A real ballistical artificer! (nm) - Jim Taylor, 2020-01-15, 07:02
-
I did use my Swiss Army a little. To assist plunger detents
- WB, 2020-01-15, 07:04
-
Or you could go
- Blake, 2020-01-15, 14:05