I see the need for a dedicated neck reaming die is to not only hold the case but also to limit and control depth. Most importantly it has a wall to hold the brass against to cut the other side. If you don't have it you risk simply belling the brass with a reamer and not actually cutting.
I managed a way to play with these, reducing wall thickness from 0.011 to 0.009" which is what I wanted. My lips are sealed as to my technique. 9 + 9 = 18 which is what I can work with in thousandths, adding it to my bullet diameter.
-
10mm Bullets - The dies to swage down 41 Magnum bullets...
- Huey, 2020-01-10, 14:54
-
WHAT DIES WILL YOU USE. I
- JT, 2020-01-10, 15:06
-
I bought .404", .401" and .400"...
- Huey, 2020-01-10, 15:09
- I'm just playing around.... - WB, 2020-01-10, 15:26
-
I bought .404", .401" and .400"...
- Huey, 2020-01-10, 15:09
-
WHAT DIES WILL YOU USE. I
- JT, 2020-01-10, 15:06