.30-30 brass. Case thickness, rim thickness etc. Batches, lots, brands, type .30-30, .375 Win. .38-55, age. It can cause you problems. My cobbled ammo initial problem was due to me trying to make straight walled 0.423" cartridges. The .400 GNR is tapered, from 0.423 to .418" at the neck, at least mine is. Depending on the bullet you use the case wall thickness at the neck is limited to about 0.0085-0.009". If you have problems check your brass and adjust accordingly. Like Gary mentioned, you can re-run loaded rounds through the FL sizer in a pinch. Ain't it fun though?!
Rule #1: If you have a problem it's probably something you did.
Old R-P .30-30 Win.
-
1911 10mm project....
- WB, 2020-01-08, 11:27
-
Yours must be totally different than my 6"
- Gary Reeder, 2020-01-08, 11:55
- I’m not joking, 30# easy to pull slide. - WB, 2020-01-08, 12:40
-
Got an email from Lee Precision today. The 10mm dies...
- Huey, 2020-01-08, 11:39
-
You know there is also a lot of variation in
- WB, 2020-01-08, 11:52
-
maybe this will help
- Gary Reeder, 2020-01-08, 12:21
-
Very cool! Was that the .400 Special? (nm)
- WB, 2020-01-08, 12:39
-
Do you actually have that reamer?
- WB, 2020-01-08, 13:12
-
I dumped that idea 10 years ago after doing
- Gary Reeder, 2020-01-08, 14:14
-
I remember you having 3-4, all at once, going too.
- WB, 2020-01-08, 15:29
- if you mean 3 or 4 series, when we moved - gary reeder, 2020-01-08, 20:14
-
I remember you having 3-4, all at once, going too.
- WB, 2020-01-08, 15:29
-
I dumped that idea 10 years ago after doing
- Gary Reeder, 2020-01-08, 14:14
-
Do you actually have that reamer?
- WB, 2020-01-08, 13:12
-
Very cool! Was that the .400 Special? (nm)
- WB, 2020-01-08, 12:39
- Of course, I'm doing this for the 38-40s... - Huey, 2020-01-08, 12:16
-
maybe this will help
- Gary Reeder, 2020-01-08, 12:21
-
You know there is also a lot of variation in
- WB, 2020-01-08, 11:52
-
Yours must be totally different than my 6"
- Gary Reeder, 2020-01-08, 11:55