But, higher pressure will usually solve that problem pronto.
I can't recommend any particular loads though. Maybe someone with experience loading that round can weigh in.
When I have that issue, I generally go to a faster powder. But, pressures can jump quick with those. Use caution...
-
Sooty 500 gnr cases
- Josh t, 2019-12-25, 16:54
-
Pressure very low and cases don't expand to seal...
- Huey, 2019-12-25, 17:06
-
And...That's a very sturdy case which worsens...
- Huey, 2019-12-25, 17:10
-
Should I abandon hs-6 and stick with 4227
- Josh t, 2019-12-25, 17:24
-
I've never loaded for that cartridge...
- Huey, 2019-12-25, 17:28
-
Thanks for the help. (nm)
- Josh t, 2019-12-25, 17:30
-
What is the goal for your load?
- Abin Sur, 2019-12-25, 19:13
-
Just looking for a load about 1000-1100
- Josh t, 2019-12-25, 19:34
-
I see HS-6 is between Unique and Blue Dot / 2400 etc.
- WB, 2019-12-26, 09:50
- I lean on 231/HP38, Titegroup and Unique in big cases... - Huey, 2019-12-26, 09:57
-
I see HS-6 is between Unique and Blue Dot / 2400 etc.
- WB, 2019-12-26, 09:50
-
Just looking for a load about 1000-1100
- Josh t, 2019-12-25, 19:34
-
What is the goal for your load?
- Abin Sur, 2019-12-25, 19:13
-
Thanks for the help. (nm)
- Josh t, 2019-12-25, 17:30
-
I've never loaded for that cartridge...
- Huey, 2019-12-25, 17:28
-
Should I abandon hs-6 and stick with 4227
- Josh t, 2019-12-25, 17:24
-
And...That's a very sturdy case which worsens...
- Huey, 2019-12-25, 17:10
-
Pressure very low and cases don't expand to seal...
- Huey, 2019-12-25, 17:06