|
|
|
This is an open forum that is not constantly monitored. Therefore, Comments that are unsafe or inappropriate may be posted from time to time. Such posts, if they are noticed, may be deleted, or may not. Accordingly, the owner of this forum assumes no responsibility for the comments made on this open forum and warns all users that any actions they may take as a result of viewing this forum are at their own risk and will not result in the liability of the owner. |
|
We will try to reply in a timely manner to your questions. However, we are extremely busy and appreciate your understanding should there be some delay. |
BOARD POLICY
- Any suggestions for changing the
- Dennis D,
2020-02-25, 14:18
![[*]](themes/default/images/complete_thread.png "Open whole thread")
- Skinner sights... Great owners (nm) - Curt, 2020-02-25, 17:02
- I have a couple set up with this, - Darryl T., 2020-02-25, 15:26
- from one old goat to another, put a low power - Gary Reeder, 2020-02-25, 15:09
- Go to Ranger Point Prescision and look at there sights. (nm) - Sid R, 2020-02-25, 15:03
- I have the XO but want to try Skinner - WB, 2020-02-25, 14:41
- info on the Python problems
- Gary Reeder,
2020-02-25, 10:47
- MANY YOU TUBERS WERE
- JT,
2020-02-25, 11:14
- for som,e reason some folks love to be negative - Gary Reeder, 2020-02-25, 11:32
- Sounds like Colt is at least serious about addressing this. (nm)
- SPB,
2020-02-25, 11:00
- when companies admit to their problems and are willing to
- Gary Reeder,
2020-02-25, 11:33
- Hopefully we are seeing the resurrection of COLT. (nm) - SPB, 2020-02-25, 11:47
- when companies admit to their problems and are willing to
- Gary Reeder,
2020-02-25, 11:33
- MANY YOU TUBERS WERE
- JT,
2020-02-25, 11:14
- a new El Diablo for the in stock list
- Gary Reeder,
2020-02-24, 15:57
- Very nice! (nm) - Derek, 2020-02-25, 04:23
- Nice! (nm) - ChrisG, 2020-02-24, 21:12
- Love that one I will take it if its it's still avlible (nm)
- F.Wyatt,
2020-02-24, 20:34
- you got it. You know the next step, call
- Gary Reeder,
2020-02-25, 10:13
- Processes completed (nm)
- F.Wyatt,
2020-02-25, 10:47
- thanks Fred (nm) - Gary Reeder, 2020-02-25, 12:26
- Processes completed (nm)
- F.Wyatt,
2020-02-25, 10:47
- you got it. You know the next step, call
- Gary Reeder,
2020-02-25, 10:13
- Great piece.
- Chance Dunlap,
2020-02-24, 18:50
- the rule yoyos at SASS won't allow our front sight so we do - Gary Reeder, 2020-02-25, 10:12
- Like the hammer. (nm) - Darryl T., 2020-02-24, 17:55
- Very nice. (nm) - Sid R, 2020-02-24, 17:38
- That's beautiful, love those grips.. (nm) - Andy S, 2020-02-24, 17:37
- Well done. (nm) - SPB, 2020-02-24, 17:03
- RIA 38 spl revolvers?
- Grover Sr,
2020-02-24, 14:14
- are ypu sure it is the model 206? Normally the 206
- Gary Reeder,
2020-02-24, 15:30
- Gary, you are right, it appears to be model 200 - Grover Sr, 2020-02-24, 17:20
- I think Police Positive Special clones
- WB,
2020-02-24, 14:26
- Model 200 Lockwork - Jim Taylor, 2020-02-24, 22:37
- Actually parkerized, not blue. Model 206 (nm) - Grover Sr, 2020-02-24, 14:16
- are ypu sure it is the model 206? Normally the 206
- Gary Reeder,
2020-02-24, 15:30
- SIG P210 Target thoughts / opinions. Contemplating
- ChrisG,
2020-02-24, 10:44
- I have a crush on the P210 Carry seen at SHOT.
- Stuart in GA,
2020-02-24, 12:48
- I'd put the Carry grips on the Target. Both - ChrisG, 2020-02-24, 13:44
- I "want" a P210, nice 1911, CZ 75, "and" a nice - ChrisG, 2020-02-24, 13:41
- CZ A01-LD 9mm
- steve todd,
2020-02-24, 11:11
- Hmmm... (nm)
- ChrisG,
2020-02-24, 12:07
- always wanted a 210 and the Target - james, 2020-02-24, 20:23
- Hmmm... (nm)
- ChrisG,
2020-02-24, 12:07
- I have a crush on the P210 Carry seen at SHOT.
- Stuart in GA,
2020-02-24, 12:48
- More BS lead free crap on the horizon!
- Larryh,
2020-02-24, 08:34
- Kill it before it grows... There are some guys out there - WB, 2020-02-24, 14:22
- That has to be even worse
- steve todd,
2020-02-24, 09:23
- Have already called and emailed my Rep! (nm)
- Larryh,
2020-02-24, 09:26
- folks think California politicians want to get rid of
- Gary Reeder,
2020-02-24, 11:04
- Gary, you hit the nail on the head! With a lead free hammer! (nm) - Larryh, 2020-02-24, 13:10
- Yes, until history repeats itself (nm) - steve todd, 2020-02-24, 11:31
- folks think California politicians want to get rid of
- Gary Reeder,
2020-02-24, 11:04
- Have already called and emailed my Rep! (nm)
- Larryh,
2020-02-24, 09:26
- PA sheep show, AK hunts
- Howard,
2020-02-24, 07:47
- OMG! Way to go, Howard! (nm) - GregG, 2020-02-25, 15:40
- Been a past member and attended many of the
- Woody,
2020-02-24, 19:57
- Stan did the world sheep slam at least 1x too(12 sheep) (nm) - Woody, 2020-02-24, 20:24
- Did a guide named Jason B attend
- Curt,
2020-02-24, 17:03
- Yes, Jason was there. I talked to him a lot.
- Howard,
2020-02-24, 20:54
- You won't find better - Curt, 2020-02-25, 16:57
- Yes, Jason was there. I talked to him a lot.
- Howard,
2020-02-24, 20:54
- Awesome Howard. Looking forward to some good stories (nm) - Blake, 2020-02-24, 10:38
- Very happy for you. (nm) - Andy S, 2020-02-24, 10:15
- Sounds great! We have a big show coming up. - Larryh, 2020-02-24, 08:07
- JT’s excellent article in Guns Magazine. Thank you JT.
- SPB,
2020-02-24, 07:02
- which issue is that? (nm)
- charlie A.,
2020-02-24, 12:01
- Assuming it was written in 2016 - Burban, 2020-02-24, 12:38
- I think it was November 2016 (nm)
- Gary Reeder,
2020-02-24, 12:37
- for sure the president he is talking about is Obama (nm) - Gary Reeder, 2020-02-24, 12:37
- Not sure which issue, but here is the link.
- SPB,
2020-02-24, 12:21
- down at the bottom of the article it shows the November 2016 - Gary Reeder, 2020-02-24, 15:59
- I enjoyed your Campfire Tales, excellent. After reading
- Andy S,
2020-02-24, 10:30
- Absolutely agree. (nm) - SPB, 2020-02-24, 11:47
- I like the. 38 Special part - too true! (nm) - ChrisG, 2020-02-24, 08:43
- which issue is that? (nm)
- charlie A.,
2020-02-24, 12:01
- I Like Garys ad in Guns Mag for his Hellcat! (nm)
- Vern,
2020-02-24, 04:41
- thanks Vern. Our Hellcat came out 4 years ago - Gary Reeder, 2020-02-24, 10:59
- For sell 475 max Reeder custom Stainless
- Kelly Brost,
2020-02-23, 19:42
- I wanna see
- JR!!$22,
2020-02-24, 08:04
- what is a 475 Long? (nm)
- Jerome,
2020-02-24, 10:42
- John Linebaugh developed the 475 Linebaugh and then - Gary Reeder, 2020-02-24, 10:51
- what is a 475 Long? (nm)
- Jerome,
2020-02-24, 10:42
- Can you please text me pictures $ - Bob Denning, 2020-02-23, 20:17
- I wanna see
- JR!!$22,
2020-02-24, 08:04
- What's the big deal about exact headstamped
- WB,
2020-02-23, 19:05
- Well for one if you travel outside the U S
- Kelly Brost,
2020-02-23, 19:19
- My family will need help. (nm)
- WB,
2020-02-23, 19:41
- Mine needs help now and I'm still here (nm)
- Kelly Brost,
2020-02-23, 19:49
- WB's needs help too. (nm) - IC, 2020-02-23, 20:52
- Mine needs help now and I'm still here (nm)
- Kelly Brost,
2020-02-23, 19:49
- My family will need help. (nm)
- WB,
2020-02-23, 19:41
- Well for one if you travel outside the U S
- Kelly Brost,
2020-02-23, 19:19
- Reddot/scope for your hard-kicking GNR MiniBeast?
- Dave H.,
2020-02-23, 17:36
- If you really must have one, try a
- Larry Fry,
2020-02-23, 17:46
- RMR sight on Bisley
- Tim Dollar,
2020-02-23, 19:16
- Had Gary put his base and a FFIII on a SBH - Larryh, 2020-02-24, 08:37
- RMR sight on Bisley
- Tim Dollar,
2020-02-23, 19:16
- If you really must have one, try a
- Larry Fry,
2020-02-23, 17:46
- Tested a bunch of lead free crap today!
- Larryh,
2020-02-23, 17:20
- you are going to have to go with a roll crimp
- Gary Reeder,
2020-02-24, 10:15
- Loaded some 455GNR and 44M with a roll crimp
- Larryh,
2020-02-24, 11:02
- your current 455 and 44 mag dies will do a good
- Gary Reeder,
2020-02-24, 12:19
- Shot a dozen in the 455GNR and 44M today
- Larryh,
2020-02-24, 13:18
- "extreme penetrator"
- Gary Reeder,
2020-02-24, 13:42
- Latex and lead free! (nm) - Larryh, 2020-02-24, 13:49
- "extreme penetrator"
- Gary Reeder,
2020-02-24, 13:42
- Shot a dozen in the 455GNR and 44M today
- Larryh,
2020-02-24, 13:18
- your current 455 and 44 mag dies will do a good
- Gary Reeder,
2020-02-24, 12:19
- Loaded some 455GNR and 44M with a roll crimp
- Larryh,
2020-02-24, 11:02
- You can also try "Cutting Edge Bullets". (nm) - DinCA, 2020-02-24, 05:34
- Use a smaller diameter neck expander. - Jim Taylor, 2020-02-23, 21:01
- I have been experimenting with the Barnes in 410GNR. - DinCA, 2020-02-23, 19:11
- Are you seating to the front of the crimp groove?
- steve todd,
2020-02-23, 17:36
- Yep, in the groove. (nm)
- Larryh,
2020-02-23, 17:41
- Thinking roll crimp, maybe? (nm)
- Larryh,
2020-02-23, 17:42
- Yup, heavy roll crimp - steve todd, 2020-02-23, 18:46
- Thinking roll crimp, maybe? (nm)
- Larryh,
2020-02-23, 17:42
- Yep, in the groove. (nm)
- Larryh,
2020-02-23, 17:41
- you are going to have to go with a roll crimp
- Gary Reeder,
2020-02-24, 10:15
- If you were going into grizzly
- Tom,
2020-02-23, 16:51
- 2 guys..1 handgun and 1 short bbled 12 Ga shotgun (nm) - Woody, 2020-02-24, 20:53
- I live in Montana. When I bowhunt in Griz country, I - Lymey, 2020-02-24, 13:53
- several below are saying the 480 but if something - Gary Reeder, 2020-02-24, 10:34
- Fishing trip, Wyo has some great - Kelly Brost, 2020-02-23, 19:25
- 500 Linebaugh 4 inch 435 wfngc at 1300fps (nm)
- Kelly Brost,
2020-02-23, 19:23
- that is exactly the same load I hit that bear - Gary Reeder, 2020-02-24, 13:45
- 475 Linebaugh Silverhawk like I shot at the HHC, or - Derek, 2020-02-23, 19:09
- 10 mm
- F.Wyatt,
2020-02-23, 18:22
- Fat buddies are always a good hedge. - WB, 2020-02-23, 18:55
- Don't laugh but I have been
- John W,
2020-02-23, 17:41
- Few will laugh. I want a 480 Bisley! (nm)
- ChrisG,
2020-02-23, 17:59
- Actually, my 5" 480 Ruger Bisley would be my choice... (nm)
- Huey,
2020-02-23, 18:10
- My Ruger 45 colt bisley or 475 Linebaugh (nm) - Kyle, 2020-02-23, 18:37
- Actually, my 5" 480 Ruger Bisley would be my choice... (nm)
- Huey,
2020-02-23, 18:10
- Few will laugh. I want a 480 Bisley! (nm)
- ChrisG,
2020-02-23, 17:59
- The biggest caliber that you shoot really well
- Blake,
2020-02-23, 16:57
- Truly, it's purpose is to comfort you. - WB, 2020-02-23, 17:54
- Agree. Here in commifornia we have lions out of control! - Larryh, 2020-02-23, 17:39
- I agree with Blake, no matter what - BlackPete, 2020-02-23, 17:28
- A slow moving fishing buddy... (nm)
- Huey,
2020-02-23, 16:53
- LOL, Huey! .22LR to your buddy’s kneecap? (nm)
- Larryh,
2020-02-23, 17:06
- Uh, maybe... (nm)
- Huey,
2020-02-23, 17:07
- 457 GNR - Alcorn, 2020-02-24, 18:34
- Uh, maybe... (nm)
- Huey,
2020-02-23, 17:07
- LOL, Huey! .22LR to your buddy’s kneecap? (nm)
- Larryh,
2020-02-23, 17:06
- About that coffee post below
- Winn,
2020-02-23, 14:44
- Worth a listen - Okie Stan, 2020-02-23, 15:25
- I saw a post on another forum
- Jim Taylor,
2020-02-23, 15:12
- Yeah, honesty not always best policy... - Huey, 2020-02-23, 15:18
- JT, do you remember doing an article on 1911s recently? (nm)
- Bucky,
2020-02-23, 14:13
- Did you read it at a Dr's office? (nm)
- JB,
2020-02-23, 16:11
- No , Lol. Son cant find his Guns magazine, he - Bucky, 2020-02-23, 16:51
- ahahahahaahaha! (nm) - Jim Taylor, 2020-02-23, 16:23
- YOU GOTTA BE MORE SPECIFIC (nm)
- JT,
2020-02-23, 15:17
- He found it , Feb 2019 Guns Mag. "Make Mine a 1911" - Bucky, 2020-02-23, 19:13
- Did you read it at a Dr's office? (nm)
- JB,
2020-02-23, 16:11
- Supply of 510 GNR brass?
- Dave H.,
2020-02-23, 09:24
- there is 150,000 rounds of out there somewhere
- gary reeder,
2020-02-23, 13:08
- Thank you Gary. I will call them this week. (nm) - Dave H., 2020-02-23, 16:23
- I shoot my .510’s a lot, get
- MTM,
2020-02-23, 11:55
- my son does that with his 500 gnr (nm) - Lynn, 2020-02-23, 14:07
- there is 150,000 rounds of out there somewhere
- gary reeder,
2020-02-23, 13:08
- I think this was one of the best...
- WB,
2020-02-23, 09:00
- Oh yeah, that's a nice one! (nm) - Derek, 2020-02-23, 12:16
- Scott... A neat "blaster" for sure... - james, 2020-02-23, 10:06
- Any body have experience with the RIA baby rock 380? (nm)
- Luke,
2020-02-22, 19:11
- we have sold several and never had any with problems - gary reeder, 2020-02-23, 13:11
- 500 Maximum
- AK3000,
2020-02-22, 18:31
- yep (nm) - gary reeder, 2020-02-22, 18:49
- Black powder
- Ed,
2020-02-22, 18:12
- ED WITH SIXGUNS I ONLY SHOOT BP IN
- JT,
2020-02-23, 17:25
- In a round about way that was what I was trying to say.
- Sid R,
2020-02-24, 11:38
- WE AGREE ON THAT. ONLY ORIGINALS AND - JT, 2020-02-24, 19:43
- In a round about way that was what I was trying to say.
- Sid R,
2020-02-24, 11:38
- There is nothing and I mean nothing advantageous
- Sid R,
2020-02-22, 18:50
- Cleaning, disassembly, reassembly
- steve todd,
2020-02-22, 19:37
- AMEN STEVE. AND I HAVE NEVER
- JT,
2020-02-22, 20:58
- I reiterate my love of black powder shooting.
- Sid R,
2020-02-23, 08:33
- FINE BUT DON'T RAIN ON SOMEONE ELSES' PARADE (nm)
- JT,
2020-02-23, 11:13
- He asked for experiences Sir. and gave him mine. (nm)
- Sid R,
2020-02-23, 14:06
- SID You obviously have a busy schedule BUT - JT, 2020-02-24, 07:23
- He asked for experiences Sir. and gave him mine. (nm)
- Sid R,
2020-02-23, 14:06
- FINE BUT DON'T RAIN ON SOMEONE ELSES' PARADE (nm)
- JT,
2020-02-23, 11:13
- BLACK POWDER - JT, 2020-02-22, 21:05
- I reiterate my love of black powder shooting.
- Sid R,
2020-02-23, 08:33
- AMEN STEVE. AND I HAVE NEVER
- JT,
2020-02-22, 20:58
- Cleaning, disassembly, reassembly
- steve todd,
2020-02-22, 19:37
- ED WITH SIXGUNS I ONLY SHOOT BP IN
- JT,
2020-02-23, 17:25
- SHOOTING THE S&W SAs--NOTE THE DIFFERENCE A
- JT,
2020-02-22, 12:10
- JT, are these guns the same strength as the Peacemakers?...
- Huey,
2020-02-22, 12:54
- now now, you didn't say the replicas. You just said
- gary reeder,
2020-02-22, 17:03
- Well, even a mind reader wouldn't have much to work with me.
- Huey,
2020-02-22, 17:08
- Huey there is hope. - Sid R, 2020-02-23, 09:05
- Well, even a mind reader wouldn't have much to work with me.
- Huey,
2020-02-22, 17:08
- Huey ...I am sure you know their history ..
- Jim Taylor,
2020-02-22, 13:41
- THE S&W .44 AMERICAN AND ALSO CHAMBERED IN .44 HENRY--
- JT,
2020-02-22, 15:13
- had Clint Eastwood been born a hundred years earlier
- gary reeder,
2020-02-22, 17:11
- Eastwood has gone senile! Fug him!
- Jk,
2020-02-22, 18:31
- unfortunately I have to agree with you. I hadn't
- gary reeder,
2020-02-22, 18:48
- Disappointing for everybody, I think - Greg M., 2020-02-22, 19:57
- Few in Hollywood I'd turn my back on... - Huey, 2020-02-22, 18:53
- unfortunately I have to agree with you. I hadn't
- gary reeder,
2020-02-22, 18:48
- Eastwood has gone senile! Fug him!
- Jk,
2020-02-22, 18:31
- For reproductions, looks like the 44 Russian is as close.. - Huey, 2020-02-22, 16:08
- had Clint Eastwood been born a hundred years earlier
- gary reeder,
2020-02-22, 17:11
- And that's exactly my thought process...
- Huey,
2020-02-22, 13:46
- Thats been my thought also, but - Amede, 2020-02-22, 17:59
- 44 Russian is the winner I think... (nm)
- ChrisG,
2020-02-22, 15:08
- Ditto... (nm) - Huey, 2020-02-22, 15:28
- THE S&W .44 AMERICAN AND ALSO CHAMBERED IN .44 HENRY--
- JT,
2020-02-22, 15:13
- I am not JT even though we have often been - Gary Reeder, 2020-02-22, 13:26
- now now, you didn't say the replicas. You just said
- gary reeder,
2020-02-22, 17:03
- Nice shooting! (nm) - Andy S, 2020-02-22, 12:24
- JT, are these guns the same strength as the Peacemakers?...
- Huey,
2020-02-22, 12:54
- Revolver open sight question
- AJ,
2020-02-22, 12:08
- The latter offers quicker aquisition and is more - ChrisG, 2020-02-22, 13:14
- YOU HAVE TO FIGURE OUT HOW TO - JT, 2020-02-22, 12:15
- it's time for the Saturday Sale. A lot of items today
- Gary Reeder,
2020-02-22, 11:00
- Model 19
- Pete,
2020-02-23, 11:14
- Still on the sale page but yeah real tempting. (nm)
- Sid R,
2020-02-23, 11:33
- refresh your page. it sold last week. (nm) - gary reeder, 2020-02-23, 13:13
- Still on the sale page but yeah real tempting. (nm)
- Sid R,
2020-02-23, 11:33
- Flat top tool
- Pete,
2020-02-22, 14:41
- Glad you like them. Easier than a knife IMO. (nm)
- Brent Clark,
2020-02-22, 21:33
- Flat Top Cutter
- Pete,
2020-02-23, 11:11
- Have to get one of those, been using a razor blade (nm) - Derek, 2020-02-23, 12:08
- Flat Top Cutter
- Pete,
2020-02-23, 11:11
- Flat top cutter photo
- Pete,
2020-02-22, 14:49
- Thank you Pete. (nm) - SPB, 2020-02-22, 15:52
- Glad you like them. Easier than a knife IMO. (nm)
- Brent Clark,
2020-02-22, 21:33
- Encore frame Sold.
- Tim Dollar,
2020-02-22, 14:22
- you are welcome Tim, Come to our HHC and - Gary Reeder, 2020-02-22, 14:34
- Dadgum, where are the pics of the 321.
- Sid R,
2020-02-22, 12:01
- sorry, I forgot i said I would post them.
- Gary Reeder,
2020-02-22, 13:00
- Fantastic! I love it. (nm)
- Sid R,
2020-02-22, 13:03
- Good snag Sid... (nm)
- Huey,
2020-02-22, 13:05
- Thanks Huey - Sid R, 2020-02-22, 17:45
- Good snag Sid... (nm)
- Huey,
2020-02-22, 13:05
- Fantastic! I love it. (nm)
- Sid R,
2020-02-22, 13:03
- sorry, I forgot i said I would post them.
- Gary Reeder,
2020-02-22, 13:00
- I'll take the 430GNR barrel please, (nm) - Larryh, 2020-02-22, 11:14
- Model 19
- Pete,
2020-02-23, 11:14
- Coffee
- Jim Taylor,
2020-02-22, 08:53
- SOMEDAY I HOPE TO - JT, 2020-02-22, 11:01
- Lots of truth and laughs there. (nm) - Howard, 2020-02-22, 10:04